I’ve been following along with the From My Carolina Home #AutumnJubilee2020 this month, and this week was time to finish the tote bag in the sew along. Directions for the finish can be found on the blog here – https://frommycarolinahome.com/2020/10/18/autumn-jubilee-sew-along-finishing-the-bag/
When I read through the instructions, I decided for I did not want to do a Velcro closure on my bag, so I ordered some “magnetic” purse closures on Amazon. I was “waiting” for that delivery on Tuesday so I could finish this project. (Note...local friends…I have extra magnetic closures if you need them….they came in a pack of 20 and it will take me that many years to use them.)
I showed details on my chosen fabrics and progress recently on a post – https://stitchinggrandma.wordpress.com/2020/10/06/stars-and-strips-autumn-jubilee/
I waited a while to come up with my “panel” for embellishment. I was supposed to insert it before quilting, but I could not decide on the fabric for a few days. I chose the linen multi color block fabric that is in the middle of the strip set for my panel and got the embroidery done a couple of weeks ago.
Yesterday I sat down to follow those “bag finishing instructions” (linked at the top of the page).
I had to first add fusible fleece to the back of my embroidered piece and then insert it in the strip set. Once it was in, I decided it needed quilting. I did some straight line quilting using the same thread as the ‘fancy stitches” on the strips, using Superior Threads Fantastico “CASHMERE” thread. (My all time favorite color!) The quilting and the fusible fleece helped make the wrinkles around the edges of my embroidery disappear.
Once that was done it was time to trim up the piece. I just could not bring myself to cutting it down to the “pattern size”, so I squared it up, trimmed and measured and went with a bigger size bag. I ended up with about 16 1/4″ by 44″.
I dug into my Autumn Jubilee bin of fabric and chose my bag lining and handle fabric.
As I was deciding on which fabrics to use, I decided that the bag NEEDED pockets inside. I had enough fabric of either color to make pockets. I used the fabric that was left after making straps and made two pockets for inside.
I added the magnetic closure to the lining before putting the lining in the bag. I put a small square of fusible fleece behind the lining fabric where the magnet prongs go through the fabric to keep it from pulling out.
I was very happy with this project and my modifications along the way. One thing I would have changed is the width of the straps and the method for doing them. These straps are about 1 1/4″ wide finished, which is ok for a bag this size, but I like a thicker strap. I know the idea was to use those 2 1/2″ strips from jelly rolls, but I cut from yardage and could have done bigger. They do have fusible fleece inside the handles, so they are going to be comfortable to hold. You might remember my story of the puny strap bag last year https://stitchinggrandma.wordpress.com/2019/06/09/taking-care-of-some-odds-and-ends/
I am dashing off to an outdoor quilt bee and will be taking this bag for show & tell. This evening I am going to practice on muslin for hem-stitching / rolled hem for a scarf. Wish me luck, and tell me your tips!
What is on your sewing table today?