All but binding……

I am nearly finished with Mittens, my pet mosaic project I started in May of 2016.  (If you click on that link you can go back to my FLICKR album and browse through all the photo’s).  I’ve written many times about Mittens on this blog, and wanted you to know I have FINALLY reached the end!

Mittens will be completed in the next day or two with a week to spare.  I entered him into the  Ocean Waves Quilt Guild Quilt Show  which takes place on July 21 & 22, 2017 in Lewes Delaware.

I did a LOT of thread work on this project trying to give the idea of his fur, especially in his ear you see below-

Thread painting

All that heavy thread work caused the sides of the quilt to pull in and make a “bow” in the sides of the quilt near the ears.

I needed to block the quilt.  I went to the internet and read lots of posts on how to block the project, and compiled info from many sources for “my method”.

Can you see how wavy the sides are???

Quilting finished

I ended up on the floor with 2 of those old fashioned cardboard cutting mats, a carpenter’s square with a yardstick attached and about 500 pins, and two tape measures.  I just kept working and working until it was as square as I could get it. The pins went through the project, into the cardboard mats and then into the floor!  (Industrial carpeting!!!)  This took me nearly 3 hours as I worked to get rid of as much of the “curve” the heavy quilting caused.  If you have a tip on how to keep that from happening, let me know! The project & borders were straight before quilting!

I got the water bottle out and started spraying.  I let it “soak” in and waiting an hour or so, and plugged in the iron, and steamed and pressed the whole quilt.  After I was finished with the iron, I set a floor fan near it and walked away.

Blocking Mittens

I let him dry for about 18 hours and then I pulled out the pins, put him on the table and trimmed him up.

While he was drying I got busy with making the binding and the label and the hanging sleeve.

I did my label on my embroidery machine and edged it in some cute cat fabric.  There are pieces of this fabric scattered out in the project.

Label for my Pet Mosaic project

I stitched down 2 sides of the label in the edges of the binding, and fused to the back of the quilt. I still have to hand stitch around 2 sides of the label, and the bottom and ends of the hanging sleeve.  Since Mittens is a wall hanging, the top of the sleeve is stitched in the edge of the binding.  Which binding?  Well….Susie’s Magic Binding of course. It is stitched to the back of the quilt and READY for me to roll to the front and take those final stitches in the area of the flange.

That is my project for this summer afternoon!  What are you working on??

 

NOTE – Cheryl Lynch taught the class where I began the project – check out her website Cheryl Lynch Quilts  .  If your guild is looking for a great teacher & speaker, she comes with my recommendation!