Labels for old projects and Autumn Jubilee

As I was changing out a table runner this summer, I remembered that the project didn’t have a label on it. If I make something I usually put some sort of label on it to remind me later of “when” I made it and “what” I referred to it by on my blog posts, in my photo collections etc. I was also moving a wall hanging his summer and when I looked at the back of it I discovered it was lacking a label. I made a mental note to “make labels” and immediately carried on doing other things.

While I was out in my sewing room, working on the never ending scrap clean up (oh…do I have a mess…..) I took a break from cutting things up and grabbed a piece of fabric and made a couple of labels on my embroidery machine.

I have to tell you I haven’t totally figured out the Janome 11000 that I have been using now for a solid year. I can’t figure out how to get more than one line of text on the screen, so I sat down at the computer to work it out. I am using the software called Embrilliance, in EXPRESS MODE, which is FREE.

I’m learning more and more all the time about how to use it. When I started with this set of labels, I found a “frame” built in to the software options. I tripped over it while poking around in the program, and can’t tell you where I found it. (Don’t you just hate when you find something cool and can’t repeat it!) Anyway, I had this green and yellow variegated thread already on the machine, and thought it would make a fun stitch out.

Variegated thread frame
fun with variegated thread
Blue bird label with frame
Finished label

I am having a little “bobbin thread” issue, with the bobbin thread showing on top with this blue thread for the words, but I’m not going to sweat the little stuff…the label is finished, stitched on.

My Little bluebird

I use the same method all the time when making a label to have a nice “finished” edge. I mentioned before that I learned the technique from Pat Sloan https://www.patsloan.com/ when she taught how to make a nice ‘circle’ for an applique project.

Essentially, you lay a piece of fusible pellon over your label, with the glue side facing the RIGHT side of your label. You stitch all around the edges, then cut a slit in the pellon and turn it “right side out. You smooth the edge where the pellon is stitched to your fabric with your finger tip and you have a nice finished edge. I iron the label to the project, then hand stitch around the edges. Most of the time two edges are enclosed in the binding, but since this was adhered after the project was made, I had to hand stitch all the way around. The beauty of the fusing is it holds your label in place while you stitch; no pins! Also, it is an extra security to keeping your label on the project. Not quite so easy to remove, depending on the type of pellon you choose to use.

circles on bluebird
Circles for applique
Close up blue bird
Lots of circles with this machine applique project

The circle turning method was used on the wall hanging the label went on. So, after 5 years of hanging around with no label, it is “FINISHED”. I did this project in a class with Pat Sloan and wrote about it several times https://stitchinggrandma.wordpress.com/2015/11/12/wild-and-free-and-bluebirds/ while it was “in progress”.

The second label I made was for my FIRE AND ICE table runner. I used the same green fabric, but switched to bright orange thread to complement the “fire’ on the runner. It’s a funny name for a project, but the ice blue and the bright oranges were the inspiration for the name.

Fire and Ice label
label ready to stitch on

I had pins in it all around because I thought I would bring it in the house, pin to the back of the runner and hand stitch on last night. I decided to wait, and get the runner out of the closet and bring it to the sewing room to press on first. I hate to battle pins! And, I think the edge will be much sharper and crisper when I press it on first.

Note, this time I had NO problem with the bobbin thread peaking through. Sometimes those machines can be a bit finicky.

Batik table runner Fire and Ice
Fire and Ice table runner
Back of the table runner
Back of the runner

To see more about this runner, look for my previous post – https://stitchinggrandma.wordpress.com/2018/08/27/fire-and-ice-batik-table-runner/

It’s been fun looking back on older projects, and getting the labels done.

Batik placemats
2018 batik placemats

I just love the different bright colors in batiks. Some can feel really dark, so they have to be used “sparingly” I think.

More placemat fun
Placemats in 2018

I can’t remember if I made 12 or more of these placemats back in 2018. I think I had given them all away to my daughters. When I was looking for a piece of fabric to use for the 2 labels I tripped over a basket of “partially made” placemats. That basket has been sitting around since 2018, so I must have thought about making more. I need a dozen for my “summer” table. I think they will all be a bit different from these I made early on. Something else to go out and work on I think. I really have to get rid of these baskets of partial projects in my next “effort” in my never ending clean up.

I am lucky to have the space, but the “clutter” is bogging me down. I am trying to spend a few hours every day this week to clear up and clean up a bit. I am on a self imposed deadline. Next week starts “Autumn Jubilee on the FROM MY CAROLINA HOME ” blog, and I always look forward to working with fall colors. Carole Carter did a Facebook Live Chat on the Friends of From My Carolina Home page (https://www.facebook.com/groups/591941124470566 ) last week and gave us a hint at what she has planned for October. She mentioned we might want to get a small “leaf” print, at least 1/2 yard in fall colors. I was able to pick up a piece this week that I hope will work. When the shop was unrolling it from the bolt, I realized it was the “end of the bolt” and took what was left. I got about 1 3/4 yard, so I will have plenty.

fabric for Autumn Jubilee 2020
Small print leaves for Autumn Jubilee

Since Carole has been doing Autumn Jubilee, I have kept a container with fall fabrics, and her patterns. It was always my “go box” when I had a quilt bee. I worked on bits and pieces for fall projects for years, and have made plenty of table runners and placemats. This week I took the bin out, sorted things, refolded and assessed what I had on hand. I have another similar sized tote with fall colors that were not “specifically” for Autumn Jubilee. I know I have used up my favorites over the years. Next blog post will be a compilation of my Autumn Jubilee projects from previous years, while I wait for the 2020 edition. I heard there will be opportunity for “machine embroidery” to be included, and I am excited to start something new. Meanwhile, I best get busy cutting up scraps and finishing up another old project left lying around.

What is happening in your sewing room this week?