I had the opportunity this last week to work on making a few gifts for other people. I also spent some time with my quilt guild neighbor, working on a few masks. She was making those masks to gift to a great grandson.
We sewed wearing masks, which is not a lot of fun. I know people are wearing masks all day at work and it amazes me how they stand it.
Thank goodness for being retired. I’m sure if I had to go to work every day and wear one, I would suck it up and carry on, but honestly, if I have to wear one to go out & have a little fun, I’d rather stay home for now. (And if you have been following me for any bit of 2020, you KNOW how many darn masks in varying styles I have made).
I did recently purchase some mask inserts that were suggested to me that help keep you a bit cooler in the mask, pushing the fabric out away from your nostrils. (Look on Amazon for a “face mask bracket” or “3D mask bracket” and you will find silicone open frames.)
I inserted them into the pocket of the masks on the style I made with pockets. On the most recent style (see my post https://stitchinggrandma.wordpress.com/2020/09/23/trying-out-a-new-mask-design/ ) I slipped the 3D mask bracket inside the layers before I stitched across the end closing it up. Those masked I marked an UP arrow with a sharpie on the inside of the mask, as the bracket definitely has an up and down.
They do really push the mask out from your nostrils and mouth, but you need to still have a snug fit over the bridge of your nose and under your chin, and that will happen with a good fitting mask like the one in the link I previously wrote about. You can also slip this frame BEHIND a ready made mask without a pocket, but the silicone touches your face, and you should be aware of that if you have an allergy. I did that with an older style mask and it was not uncomfortable. I think that is where you get the most benefit of holding the fabric away from your nostrils. The pack I bought had ten, and so I have played with various options. They even make them in kids sizes.
I can say that the mask frames that are inserted loosely inside my masks go through the washer and dryer without a problem. I just straighten them out when I take the mask out of the mesh bag from the clothes dryer. (REMEMBER your mask should be washed EVERY TIME you wear it, in HOT soapy water, and machine dried to kill any germs. DON’T wear the same mask over and over without washing!!!)
Other fun sewing….I want to go visit my friends, Walt & June at assisted living this week, and promised last time we talked that I would bring her “fall” placemats. I made two this weekend using a block pattern from Carole’s Autumn Jubilee 2017, Stars on Autumn Lane (pattern still available for A block and B block –https://frommycarolinahome.com/2017/10/13/stars-on-autumn-lane-block-a/ https://frommycarolinahome.com/2017/10/20/autumn-lane-block-b/ )
(You know me, I love the patterns from Carole’s blog – FROM MY CAROLINA HOME. Go take a look!)
I added a 3″ border and corner stones, then trimmed them to 2.5″ after the quilting. I used Pellon fusible fleece for the batting. The border fabric is right out of my friend June’s boxes of fabric I have stored. It is very “1980’s” but the colors were perfect, and I hope she recognizes it as “something from home”. I cleared out her sewing room (it took me 3 days with my hubby packing along side me) when she moved to assisted living 3 years ago. I often take her pieces of fabric from her boxes I have stored, to use, but she isn’t sewing too much anymore. When I was able to volunteer there to sew with the ladies as a group, we primarily used June’s fabrics and that made her very happy!
I decided to “turn” these placemats instead of bind them to get them finished a little faster. It is NOT my favorite method, but they are DONE. ( I can never get a good closure even trimming away the batting at the opening. Anybody got a secret method? )
Another fun project — One of my daughter’s is having a birthday, and we all got together yesterday for a fun party, where she cooked for US, including the best carrot cake in the world for her own birthday cake. (She loves to cook and to entertain.)
I made her a new apron from fabric I bought a few years ago. (So nice to have it in my stash waiting). It is a very durable twill fabric with a delightful print. I am certain it came from Hobby Lobby. The “last” apron I made for her I wrote about here – https://stitchinggrandma.wordpress.com/2017/03/20/a-sense-of-accomplishment/
I wish I had made a note in that blog post of “which” pattern I had made for her. I dug through my file drawer and pulled out my patterns and thought I would try this one. I’ve made it before, but honestly can’t remember which modifications I made. After she wore that apron (2017 edition) she made some comments about fit…which I intended to save and have lost. SIGH………
I did like the pockets, but of course, I had to slightly modify them. In the B view of the pattern the pockets bloused out too much, so I made it into 2 pockets by running a stitch down the middle. The inverted pleat gives you extra “room” if you need it.
There is also a top pocket, and I left it as a single pocket. I tested, and my phone fit right in.
No need to divide that top pocket for a pen.
I used the Medium size, but am annoyed at how “long waisted” it seems. It doesn’t look it laying on the table, but the minute it was finished and I tried it on, I was annoyed. It’s just FINE for my 5’11” tall husband (I made him one a long time ago from this pattern). My daughter is about 5’5″, so it will fit her better than me! First thing I did after trying it on was to pull it up at the apron ties and insert a little fold. I guess it will have to do. It’s done, and gifted! I pre-washed the fabric, so I can’t hope for much shrinkage. It does have a good “wrap” so your lower half is protected.
I was happy that I left a note in the pattern to not try to “turn” those apron ties. I modified how I made them an did them like “double fold bias binding”, folding down the center and then folding in the edges and pressing and top stitching. Maybe a little narrower than the original design of the pattern, but functional. I did leave a note in the pattern this time about how long waisted it is !
My hubby laughs at my angst, because he said “IT’s an APRON, not a designer dress”.… and I know my daughter will splash and wipe her hands in a hurry like she does with all the other aprons I’ve made over the years. She puts an apron on every time she works in the kitchen at her house and mine, so I know it will get used ! Functional!
My last little project was for one of the grand kids. She is going to dress up like ROSIE THE RIVETER for Halloween.
During dinner last week we chatted about her costume, and I had shared a red bandana I had. Her mommy said I could help with the costume by making a mask that she could wear while she was out in her costume. This is the idea we came up with –
I used Superior cotton GLOW IN THE DARK white thread when stitching it out on my embroidery machine. It kind of glows green in the dark which she just loved.
Don’t panic about all the holes that machine embroidery does…..the back of the mask is TWO layers, with a filter pocket. Her mom can add a piece of cut away stabilizer in the pocket for a filter. That will keep her safe….
I did the whole mask “in the hoop” on my embroidery machine. I had a pattern for the mask from Smart Needle.com that I used. I did the placement and tack down stitch, then switched over to the wording in another file that I had done up on Embrilliance using the built in block lettering.
I adjusted the wording to fit in the mask and loaded that glow in the dark thread. (LOTS of thread breaks with that cotton thread).
Once the front was finished, I added the elastic, making sure there were knots at the ends and taped them down. Then I added the two backing pieces on the TOP of the mask, returned to the original “smart needle” pattern in the machine, and ran the placement stitch and the tack down stitch again (twice). I didn’t want a lot of top stitching on the mask, so I removed it from the hoop, tore away the stabilizer and trimmed the mask and turned it . I’m so happy with my machine and all the little tricks I have learned over the course of the year where I can interrupt the machine and easily modify to suit my needs. It took me about an hour to make, including the test mask. The test I did as a child size and it was VERY small. 🙂
I have “one more” small project to work on for the same granddaughter . Can you guess what I am doing with this?
I went in search of this fabric on Friday and ended up on a 63 mile round trip ride! Any advice for a rolled hem would be appreciated! I’ll practice on muslin first!
What is happening in YOUR sewing room? Any Halloween costumes? Christmas stitching? Do tell.